OUR EXCLUSIVE PRECISION AIR-CONDITIONING TUNE-UP PROCEDURE INCLUDES, AS NEEDED:
- Chemically clean and thoroughly wash condenser coil(s).
- Thoroughly clean or replace standard air filter(s).
- Wash and level condensing unit for proper motor and bearing wear.
- Lubricate motor and fan bearings as well as other moving parts as necessary.
- Clean and inspect evaporator coil and drain pain when readily accessible.
- Clean and inspect condensate drain lines and fittings.
- Clean, level and calibrate thermostat.
- Adjust and thoroughly clean blower motor and fan assembly as needed.
- Inspect, tighten and test all electrical connections. This includes disconnect switch.
- Inspect all cooling system electrical wires, connectors and terminals.
- Test system starting and running capacitors.
- Test all controls, switches, relays, transformers, contactors, motors and fans.
- Measure starting and running amperes, line voltage and control voltage.
- Test system starting capabilities.
- Test system for proper air-flow and air delivery.
- Inspect and adjust all safety controls.
- Monitor refrigerant (Freon) pressures and temperatures.
- Test and record super-hear and sub-cooling. Compare with factory specifications.
- Adjust Freon metering control device per factory/manufacturer recommendations.
- Test and measure air conditioning system for proper production and capacity.
- Monitor fan motors and compresser operating temperatures.
- Apply weather resistant protective coating to the outside unit. (Condensor)
- Complete and present full written report and make any necessary recommendations.